Analog to Digital Conversion on Atmega 8, 168 and 328 MCUs. Part 1

Tutorial Type:

Tutorial Difficulty

Parts Required

Tools Required

ADC on an ATMEGA 168 Tutorial on Protostack.com


Earlier this year Protostack posted a turorial on Analog to Digital Conversion on an Atmega 168. This tutorial covers everyting from the low pass filter on the AVCC lines to the registers you will need to tweak on the AVR itself. We are sure that this will come in handy in our future projects as well as yours. Head over to the Protostack site and check out the full tutorial, and while you are there pick up one of the new Atmega 168 Development Kits or their Exprimenters Kit! Check out the schematic after the jump.

ATMEGA 8 168 328 Digital to Analog Conversion Schematic. ADC

Click the image for a full sized version.

Other Articles You Might Like

Review: Lulzbot AO-100 3D Printer part 1Lulzbot AO-100 / AO-101 reviewed

Tutorial: DIY Telescope to PC CableDIY Telescope to PC Cable

Project: LED Strip Bench LightingDIY RGB LED Strip Bench lighting

Review: ISO-TIP Portable  Soldering KitISO-Tip Portable Soldering Kit Review

Article: Arduino Due Overview

Project: 3D Printed Balloon Powered CarPrint a Balloon powered Jet Car with your 3D printer