desktop CNC

TwoTrees ED1 enclosed desktop CNC machine with a smoked glass cover, spindle and tool changer inside, a carved piece on the bed, and a touchscreen at the front right
TwoTrees Recaps the ED1 Desktop CNC After IFA, With Early-Bird Pricing at $2,299
CNC
TwoTrees' ED1 is an enclosed desktop mill with a five-tool changer, a 600 W spindle, and a fourth axis, in pre-sale at $2,299 until September 28 with shipping planned for November.
FoxAlien Masuter Pro Max 2×2 CNC router rendered on a white background, with orange end plates, a silver gantry, and a brushless spindle above a perforated MDF bed
FoxAlien Publishes the Masuter Pro Max 2×2 at $899 With a 500 W Spindle
CNC
FoxAlien's fourth-generation Masuter Pro Max 2×2 is $899 with a 500 W brushless spindle and a 600 mm square bed, shipping with NEMA 17 motors and a path to closed-loop upgrades.
CNC Wegstr DARK desktop CNC mill in dark gray with a red spindle head and a small work plate on its sliding table
WEGSTR's CNC Wegstr DARK Is a €3,190 Desktop Mill Built for Circuit Boards
CNC
A look at the CNC Wegstr DARK, a Czech-built desktop mill listed at €3,190 and sold with circuit board milling kits, rivets, a liquid bath, and Cut2D software support.
TwoTrees TTC 450 Pro CNC router with a red and black frame cutting a carved wooden workshop sign on a workbench, with its touchscreen controller at the front left
TwoTrees Retires the Original TTC 450 and Lays Out the Rest of Its CNC Line
CNC
TwoTrees marked the original TTC 450 as discontinued at a $349 clearance price and sorted its remaining routers: TTC 450 Pro at $439, 450 Ultra at $699, and TTC 6050 at $1,499.
Fully assembled Genmitsu PROVerXL 2×2 CNC router with a blue and silver frame, a spindle above a slatted table holding a carved round relief, and the controller box at the front right
SainSmart Cuts the Genmitsu PROVerXL 2×2 to $2,399 With a 710 W Spindle
CNC
SainSmart is selling the Genmitsu PROVerXL 2×2 for $2,399 through December 31, down from $2,999, with a 710 W spindle, Z probe, and Wi-Fi control in the box.
Makera Z1 desktop CNC machine with a dark tinted enclosure and a white and silver side panel carrying the Makera Z1 name, shown at a three-quarter angle on a white background
Makera Takes the Z1 Desktop CNC to Kickstarter With a $1,199 List Price
CNC
Makera's Z1 desktop CNC launches on Kickstarter October 28 with a die-cast frame, a fourth axis, and one-click tool calibration, from $799 for early backers.
Tormach xsTECH Pro enclosed CNC router with a glass door, a spindle visible inside, and a touchscreen on an arm at the right
Tormach Introduces the xsTECH Pro Enclosed Router at $9,995
CNC
Tormach's xsTECH Pro is an enclosed desktop CNC router with a 4-station automatic tool changer and PathPilot control, priced from $9,995 for schools and makerspaces.