FNIRSI's DLA-16 Plus and DLA-32 Plus USB 3.0 logic analyzers sample up to 1 GHz with 4 Gbit of memory and 120-plus decoders, with the 32-channel model listed at $259.
MINIWARE's AirGo 140 is a 115 g pen-shaped hot-air gun powered by USB Power Delivery at up to 140 W, reaching 300°C in as little as 10 seconds, with a 100,000 rpm fan and app control.
Hoto's first soldering iron, the Snapbloq I-A06, runs on a built-in 2,000 mAh battery at up to 60 W or on mains power at up to 140 W, and sells for $79.99 alone or $99.99 as a kit.
Pico's PicoScope 5000E series is a four-channel USB oscilloscope family with 16-bit resolution on all channels, 22 µV RMS noise on the most sensitive ranges, and Plus models that switch to 8-bit for up to 500 MHz.
Siglent's SMM3000X source-measure units offer 6.5 digits, up to 210 V and 3.03 A DC (10.5 A pulsed), 10 fA and 100 nV resolution, 100,000 points per second, and 31.8 W per channel.
Circuit Cellar reported a $659 starting price for UNI-T's MSO1000HD 12-bit, 4-channel mixed-signal oscilloscopes, with 16 digital channels, 100 Mpts of memory, and an optional logic probe.
The ALIENTEK T90C is the large-tip model in the T90 series, with a T65 cartridge, 18 to 130 W of heating, and a seller-claimed 5 second solder melt. Switch Science began selling it on September 10, 2025.
The ALIENTEK T90B is the highest-output iron in the T90 series, with a T245 tip, 18 to 140 W of heating, and a seller-claimed 3.5 second solder melt. Switch Science began selling it on September 10, 2025.
The ALIENTEK T90A is a 55 g USB-C soldering iron with a fine T210 tip, 18 to 65 W of heating, and a seller-claimed 2.5 second solder melt. Switch Science began selling it on September 10, 2025.
Switch Science began selling three ALIENTEK USB-C soldering irons on September 10, 2025: the T90A (T210 tip), T90B (T245 tip, up to 140 W), and T90C (T65 tip, up to 130 W).
Hantek's upgraded DSO2D20 series offers two-channel scopes at 200, 350, or 500 MHz with 2 GSa/s sampling, five serial decoders, and an optional one-channel generator, but only 80 kpts of memory.
Hakko's July 8, 2025 FX-971 series release covers the 100 W FX-971, the 2-port FX-972, and the 3-port FX-973 rework station, with a patented composite tip, a tilting display, and calibration over infrared.
Knipex's summer 2025 update adds extra-slim Cobra ES water-pump pliers in 180 and 250 mm and the EvoStrip self-adjusting stripper, rated 0.03 to 10 mm², all available from July 2025.
Hakko's FR-850 micro hot-air station pairs 1.5 to 5 L/min airflow with a 50 to 600°C range for dense surface-mount rework, with sales set to begin June 9, 2025.