News

ALIENTEK T90B soldering iron with its 178 mm by 16 mm dimensions marked
ALIENTEK T90B USB-C Soldering Iron Offers Up to 140 W With a T245 Tip
Workshop & Tools Electronics Tools
The ALIENTEK T90B is the highest-output iron in the T90 series, with a T245 tip, 18 to 140 W of heating, and a seller-claimed 3.5 second solder melt. Switch Science began selling it on September 10, 2025.
ALIENTEK T90A soldering iron with its 178 mm by 16 mm dimensions marked
ALIENTEK T90A USB-C Soldering Iron With a Fine T210 Tip Goes on Sale at Switch Science
Workshop & Tools Electronics Tools
The ALIENTEK T90A is a 55 g USB-C soldering iron with a fine T210 tip, 18 to 65 W of heating, and a seller-claimed 2.5 second solder melt. Switch Science began selling it on September 10, 2025.
ALIENTEK T90 soldering pen and tweezers shown with several tip cartridges
Switch Science Starts Sales of the ALIENTEK T90 Series of USB-C Soldering Irons
Workshop & Tools Electronics Tools
Switch Science began selling three ALIENTEK USB-C soldering irons on September 10, 2025: the T90A (T210 tip), T90B (T245 tip, up to 140 W), and T90C (T65 tip, up to 130 W).
Red and black Milwaukee M18 FUEL SURGE hydraulic driver against a black background
Milwaukee Announces a Second-Generation M18 FUEL SURGE Hydraulic Driver
Workshop & Tools Power Tools
Milwaukee's second-generation M18 FUEL SURGE 1/4 in. hex hydraulic driver claims up to 50 percent less noise than a standard impact driver, 1,000 in-lbs of torque, and a 4.3 in. body. Kit 2761-22 is $349.
Creality Falcon A1 Pro enclosed laser engraver shown in an official product image
Creality Falcon A1 Pro Adds Dual-Laser Engraving and Camera Alignment
Laser Cutting
Creality's enclosed Falcon A1 Pro combines a 20W blue diode laser with an optional 2W infrared module, camera alignment, autofocus, and app control.
Shapeoko HDM V3 CNC router with its aluminum hybrid table, black gantry, and water-cooled spindle shown from the front
Carbide 3D Shows the Shapeoko HDM V3 With a Water-Cooled Spindle
CNC
Carbide 3D's Shapeoko HDM V3 pairs HG15 rails and 16 mm ball screws with an 80 mm water-cooled spindle rated up to 2.2 kW, aimed at shops that cut aluminum.
Top view of the Arduino Nano R4 development board
Arduino Launches the Nano R4 With UNO R4 Power in a Smaller Package
DIY Electronics Arduino
Arduino's Nano R4 brings the UNO R4's 32-bit Renesas processor, analog features, CAN support, and compact maker-friendly hardware to the Nano format today.