Getting started with the Gertduino, an Arduino-compatible shield for the Raspberry Pi, including installing the Arduino IDE on Raspbian and driving a motor with the Arduino Motor Shield R3.
Tutorial Type: Arduino Tutorial Difficulty Difficulty Level 2 Parts Required Arduino Water Flow Meter 10k Resistor Breadboard Jumper Wires Tools Required This i
Today we are going to learn how to read the RPM of a PC Fan. This also works well for the Water Pumps used in PC Water Cooling as well as any dc pump or fan that has a rotation sense wire. This is accomplished by counting the falling edge of the square wave generated by the Hall effect sensor that is located inside ...
So you just finished soldering up your Sanguinololu 1.3A board and are ready to test it to see if everything is working properly, but before you can upload any firm ware to the board you need to burn a Bootloader to the ATmega 644P. In this tutorial I will cover using an Arduino or Arduino clone as your ISP programm...
